Marker Light Housing
Marker Light (LED Type)
Headlight Mounting Holes (2 of 3)
(Headlight has been removed)
Remove the Weight Marker (see Figure 6). This is done by removing the two bolts
connecting it to the back of the Upper Brush Guard rail structure.
k) Remove the Clearance Light Bar located on the front of the cab just under the roof line
Light Bar wire lead approximately 6 in. from the exit hole. Install a closed-end wire
connector on the end of the wire (inside the cab), fold the wire inward, and secure it in
place with a wire tie. Remove the six screws holding the Cab Top Clearance Light Bar
to the cab roof overhang at the top of the windshield, and remove the Cab Top
Clearance Light Bar from the vehicle.