LUBRICATION CHART - Continued
Table 2. Notes.
SOLVENT CLEANING COMPOUND
Solvent Cleaning Compound (MIL-PRF-680) is flammable and may cause irritation to the
eyes or skin. Wear protective goggles and gloves; avoid contact with skin, eyes, and
clothing. Use in well ventilated areas and keep away from heat or flame. Failure to comply
may result in personnel injury or death.
Accidental ingestion can cause irritation of digestive tract and respiratory tract, and may
cause lung and central nervous system damage. Can be fatal if swallowed. First aid for
ingestion: do not induce vomiting. Seek immediate medical attention.
First aid for skin contact: remove contaminated clothing. Wash skin thoroughly with soap
and water. If symptoms persist, seek medical attention.
First aid for eye contact: flush with water for 15 minutes or until irritation subsides. If
symptoms persist, seek medical attention.
Inhalation of high/massive concentrations can cause coma or be fatal. First aid for
inhalation: move to fresh air. If not breathing, provide artificial respiration. If symptoms
persist, seek medical attention.
Keep away from open flames and other sources of ignition. Failure to comply may result in
serious injury or death to personnel. The flash point for type II solvent cleaning compound
is 141 to 198°F (61 to 92°C) and type III is 200 to 241°F (93 to 116°C). Fire extinguishers
should be placed nearby when using solvent cleaning compound.
Improper cleaning methods and use of unauthorized cleaning solvents may injure personnel
and damage equipment.
Cloths or rags saturated with solvent cleaning compound must be disposed of using
authorized facilities procedures.
Eye shields must be worn when cleaning with a wire brush. Flying rust and metal particles
may cause injury.
Failure to comply may result in injury or death to personnel.
COLD TEMPERATURE BELOW -10°F (-23°C). Remove
lubricants prescribed in Table 1 for temperatures above -10°F
(-23°C). Clean parts with solvent cleaning compound. Re-
lubricate with lubricants specified for temperatures below
LUBRICANTS. The following is a list of lubricants with military OE/HDO - MIL-L-2104, Grade 10
symbols and applicable specification numbers:
OEA - MIL-L-46167
GAA - MIL-G-10924
CW - MIL-C-16173, Grade 1