|
| |
TM 9-2320-364-20-3
2-2030
8. AXLES NO. 3 THROUGH NO. 5 TIRE PRESSURES DO NOT AGREE WITH CTIS
SETTINGS (CONT).
3.
Is continuity measured on all
wires between connector
MC110 and connector MC64?
Repair wire(s) (see
schematic Fig 2-48)
or notify DS
Maintenance.
Verify repair, go to
Step 7 of this Fault.
YES
NO
Front tires inflate/deflate.
CTIS wire harness
connections OK.
CTIS controller OK.
Wiring harness faulty
CTIS rear manifold faulty.
Transducer faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If wire harness is faulty, tires will
not inflate to correct pressure.
|
