| |
TM 9-2320-364-20-3
2-2408
11. MIDDLE FRAME DOES NOT UNLOAD IN MANUAL MODE (CONT).
4.
Repair wire 1480
(see schematic
Fig 2-52) or notify
DS Maintenance.
Verify repair, go to
Step 10 of this Fault.
YES
NO
LHS hoses OK.
Wire 1489 OK.
Wire 1480 faulty.
Hydraulic selector switch faulty.
LHS control assembly faulty.
Middle frame lockout relay
faulty.
Wire 1465 faulty.
Wire 1435 faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If wire 1480 is loose, faulty, or
shorted to ground, 22 to 28 vdc
will not be present at LHS
control assembly from hydraulic
selector switch.
WARNING
Is continuity measured on
wire 1480 at harness
connector MC93, terminal B
and harness connector MC83,
terminal D?
Read WARNING
on Page 2-2409
|