|
| |
TM 9-2320-364-20-4
12-12
12-3. BRAKE SHOE ADJUSTMENT (CONT).
NOTE
Gap between brake drum and brake shoe should be measured in two spots as shown in
illustration.
(2)
Using feeler gage, check clearances at brake shoe (2) centers. Back off adjusting bolts (1) alternately one
click at a time until the gap between brake drum (3) and brake shoe (2) is 0.0315 in. (0.8 mm) minimum
and 0.0472 in. (1.2 mm) maximum.
(3)
Turn brake drum (3) by hand. If brake drum does not turn freely, repeat Steps (1) through (3).
b.
Follow-On Maintenance:
Uncage brakes (No. 3, 4 and 5 axles only), (TM 9-2320-364-10).
Install wheels and tires, (TM 9-2320-364-10).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK
|
