|
| |
TM 9-2320-364-20-5
17-61
NOTE
There are four data plates secured
with rivets. All four data plates
are installed the same way.
(2)
Position and install four data
plates (53), (54), (55) and (56) on
side panel (2) with rivets (52).
NOTE
There are seven rocker switches
and one pilot light housing. All
are installed the same way.
(3)
Install rocker switches (16), (18), (36),
(33), (30), (27) and (24) on side
panel (2) until tabs (51) on rocker
switches are secure.
(4)
Install panel light (14) on side panel (2).
(5)
Install washer (50) and nut (49) on panel
light (14).
NOTE
Perform Steps (6) through (8) if
equipped with LHS Controller
Protection Kit.
(6)
Position two fuses (48) in fuse holders
(6) and install covers (47).
(7)
Install two seals (46) and fuse holders
(6) on side panel (2) with two nuts (45).
(8)
Install relay (8) on side panel (2) with
screw (43) and locknut (44).
(9)
Install hydraulic selector switch (39),
hydraulic selector switch mounting
plate (42) and four screws (41) on side
panel (2).
(10) Install hydraulic selector switch face
plate (40) on hydraulic selector switch (39).
(11) Install hydraulic selector switch handle (38)
on hydraulic selector switch (39) and tighten
screw (37).
24
49
36
46
27
30
44
33
45
45
18
14
47
48
8
2
16
43
46
6
6
47
6
6
48
51
50
|
