|
| |
TM 9-2320-364-34-2
12-67
(2)
Remove locknut (7), screw (8) and cushion
clip (9) from bracket (10). Discard locknut.
NOTE
Position drain pan under
front steering gear.
Remove cable ties as
required.
Tag and mark hoses prior to
removal.
Cap hoses after removal.
(3)
Remove hose 2878 (11), hose 2877 (12) and
preformed packings (13) from steering
gear (6). Discard preformed packings.
(4)
Remove nut (1), lockwasher (2), screw (3)
and intergear link (14) from pitman arm (5).
Discard lockwasher.
(5)
Tie end of intergear link (14) out of the way
with cable ties.
(6)
Remove locknut (15), screw (16) and
intergear steering shaft yoke (17) from
steering gear (1). Discard locknut.
Intermediate steering gear weighs
170 lbs (77 kg). Attach lifting
device prior to removal to
prevent injury to personnel.
(7)
Attach lifting device to steering gear (6) and
bracket (10).
(8)
With the aid of an assistant, remove six
locknuts (18), screws (19) and steering
gear (6) and bracket (10) from frame (20).
Discard locknuts.
(9)
Position steering gear (6) and bracket (10) in
chain vise.
|
