3-23. ENGINE OIL BREATHER AND HOSES REPLACEMENT (CONT).
Position hose (2) and two clamps (1) on
breather tube (9).
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
Apply sealing compound to two screws (4).
Install gasket (7) and breather elbow (6) on
left cylinder head (8) with two washers (5)
and screws (4). Tighten screws to 60 lb-in
Position two hoses (2) and (3) and four
clamps (1) in original position as shown.
Tighten four clamps (1).
Install blower, (Para 4-4).
Remove wheel chocks, (TM 9-2320-364-10).
END OF TASK