Pivot and spindle assembly
weighs 90 lbs (41 kg). Support
pivot and spindle prior to
removal to prevent possible
injury to personnel.
With the aid of an assistant, support spindle
and use inertial extractors to remove two
Remove two oil seals (9) by tapping down on
one side of oil seal to knock it loose.
Discard oil seals.
Support axle shaft during
removal of pivot and spindle
assembly to prevent damage to
bearings inside pivot and spindle
With the aid of an assistant, remove pivot
and spindle assembly (5) from axle
housing (10) and axle shaft (11).
Remove two trunnion bearings (12) from
axle housing (10).