Use extreme care when positioning flatrack from ground to trailer. If flatrack is not moved
slowly, flatrack may contact winch on MHC and damage may occur to equipment.
With the aid of an assistant, hold lifting strap (1) on rear of flatrack (4) to guide flatrack in position while
operating MHC (7) and position flatrack over trailer (8).
Ensure two load locks (9) on trailer (8) are retracted.
Ensure flatrack rollers are positioned tight against rear stop on trailer. Failure to comply will
result in improper loading of flatracks and damage to equipment may result.
Lower flatrack (4) on trailer (8).
Engage load locks (9) on trailer (8) to secure flatrack (4).
Remove two lifting straps (1) from MHC (7).
Remove three lifting straps (1) from tiedown rings (3), (5) and (6) on flatrack (4).