INSTALLATION - TB-9-2320-279-13-P-20066

TB 9-2320-279-13&P-2

DOOR BALLISTIC GLASS AND FRAME ASSEMBLY REPLACEMENT - CONTINUED

0014 00

INSTALLATION - CONTINUED

WARNING

Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.

Keep clear of heavy parts supported only by lifting device. Failure to follow this warning may cause

injury or death to personnel.

For proper threat protection, door ballistic glass must be correctly installed into door frame. During

installation, ensure that stencil marking "INSIDE OF VEHICLE" is located on inside of cab. Improp-

erly installed door ballistic glass will not protect occupants. Failure to follow this warning may cause

injury or death to personnel.

NOTE

Door ballistic glass weighs 75 lb (34 kg).

12.

With assistance, install door ballistic glass (1) by sliding into end of channel (7).

NOTE

It may be necessary to cut bracket (8) approximately 0.5 in. (1.3 cm) to allow handle to rotate.

0.5 INCH

(1.3 CM)

417-138

0014 00-6