Click here to make tpub.com your Home Page

Page Title: REMOVAL
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TB 9-2320-279-13&P-2
ROOF ARMOR REPLACEMENT - CONTINUED
0024 00
REMOVAL
1.
Loosen five bolts (5) from underside of left-front roof armor bracket (4).
2.
Remove six locknuts (2), washers (3), and left-front roof armor bracket (4). Discard FOUR locknuts.
NOTE
Loosely reinstalling locknuts secures left-front stud plate to roof armor during removal procedure.
3.
Loosely reinstall two locknuts (2) on left-front stud plate (1).
4.
Remove four locknuts (15) and washers (16) from left-rear roof armor bracket (20). Discard locknuts.
5.
Remove four locknuts (17), washers (18), bolts (19), left-rear roof armor bracket (20), and spacer plate (21). Discard
TWO locknuts.
NOTE
Loosely reinstalling two locknuts secures left-rear stud plate to roof armor during removal procedure.
6.
Loosely reinstall two locknuts (15) on left-rear stud plate (22).
7.
Remove 10 bolts (7), lockwashers (8), and washers (9) from roof armor (6). Discard lockwashers.
8.
Remove two bolts (10) and spacers (11) from opposite corners of escape hatch opening.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Roof armor weighs 166 lb (75 kg).
9.
Attach sling and lifting device to two lifting eyes (13) in center holes of roof armor (6).
10.
Using lifting device, remove roof armor (6) from cab roof and place on flat surface.
11.
Remove two locknuts (2) and left-front stud plate (1). Discard locknuts.
12.
Remove two locknuts (15) and left-rear stud plate (22). Discard locknuts.
13.
If damaged, remove escape hatch seal (12) from roof armor (6).
14.
Remove four locknuts (24), washers (25), bolts (26), washers (27) and two storage brackets (23) from roof armor (6).
Discard locknuts.
15.
Remove two lifting eyes (13) and stud plate (14) from roof armor (6).
0024 00-2

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business