Figure 28. Door Lifting Bracket.

II113300-1-103

Rev. A

w) Install a lifting strap through the Lifting Brackets (P/N 113354-1-103) located on top of

the Armored Door Assembly (P/N 113310-1-103) (see Figure 28).

Lifting Bracket,

P/N 113354-1-103

Figure 28. Door Lifting Bracket.

x) Using the lifting strap and material handling equipment (hoist, forklift, etc.), position the

Armored Door Assembly so that the door can be attached to the hinge using ten (10)

bolts, as shown in Figure 29.

y) Once the door is securely attached to the hinge, remove the material handling

equipment, lifting strap, and Lifting Brackets from the door. Do not discard the hardware

(nuts, bolts and washers), as they will be used in the next few installation steps.

z) Install the Door Strap Assembly (P/N 113386-1) using the hardware as shown in

aa) Re-install the 0.375-16 x 5.000-in.-long bolt, nut, and washers where the aft lifting

bracket was removed.

0037 00-56