DRAFT
TB 9-2320-364-13&P-1
AC COMPRESSOR DRIVE BELTS REPLACEMENT/ADJUSTMENT - Continued
ADJUSTMENT
PLSAC062
NOTE
Perform Step 1 if compressor belts were not removed.
1. Loosen six locknuts (1) and screws (2).
CAUTION
Do not over tighten belts. Failure to comply may result in damage to equipment.
2. With the aid of an assistant and using a belt tension gage, tighten two belts (3) to 90-100 lbs.
(400-445 N), and tighten six locknuts (1) and screws (2).
FOLLOW-ON MAINTENANCE
1. Install left side noise panel and rubber flap (WP 0051).
END OF WORK PACKAGE
0020-5/(0020-6 blank)