DRAFT
TB 9-2320-364-13&P-1
AC COMPRESSOR MOUNTING BRACKET REPLACEMENT - Continued
INSTALLATION
PLSAC048
1. Position compressor mounting bracket (4) on cradle support (23).
2. Install compressor mounting bracket (4) on cradle support (23) with two screws (22) and locknuts (21).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
3. Apply sealing compound to threads of screw (18).
4. Install compressor mounting bracket (4) on transmission (20) with lockwasher (19) and screw (18).
Tighten screw (18) to 54-65 ft-lbs. (73-88 Nm).
0021-4