DRAFT
TB 9-2320-364-13&P-1
REMOVAL
PLSAC036
1. Install battery box cover (1) on battery box (2).
NOTE
Wheel chocks and wooden blocks are placed on top of battery box cover to aid in
positioning of condenser to access solenoid.
If wheel chocks are not available, use similar size material to support condenser. Support
needs to be approximately 5.75 by 15.5 by 15.5 in.
2. Position two wheel chocks (3) on top of battery box cover (1).
PLSAC037
NOTE
Wooden blocks used in Step 3 should be 2 by 4 by 16 in.
3. Position two wooden blocks (4) on top of wheel chocks (3).
0026-2