DRAFT
TB 9-2320-364-13&P-1
AC OPTIC RIBBON LIGHT SOURCE WIRE HARNESS REPLACEMENT - Continued
REMOVAL
PLSAC117
NOTE
Tag and mark wires prior to removal to ensure proper installation.
1. Remove screw (1), lockwasher (2), washer (3), and ground wire (4) from heater/evaporator (5). Discard
lockwasher.
NOTE
Wire 1052 being cut in Step 2 is from cab wire harness.
2. Cut wire 1052 (6) below butt splice (7).
3. Remove lamp socket (8) from light source (9).
PLSAC118
4. Remove bulb (10) from lamp socket (8).
0043-2