DRAFT
TB 9-2320-364-13&P-1
AC WIRING HARNESS REPLACEMENT - Continued
REMOVAL
PLSAC103
NOTE
Refer to Appendix A, Figure A-1, for electrical schematics.
Tag and mark connectors and wires prior to removal to ensure proper installation.
Remove cable ties as required.
Note routing of wire harness prior to removal to ensure proper installation.
1. Remove screw (1), lockwasher (2), washer (3), and ground wire (4) from condenser (5). Discard
lockwasher.
2. Disconnect connector (6) from connector (7).
3. Remove locknut (8), screw (9), cushion clip (10), and support bar (11) from stabilizer bracket (12).
Discard locknut.
4. Remove AC wire harness (13) from cushion clip (10).
0048-2