DRAFT
TB 9-2320-364-13&P-1
AC WIRING HARNESS REPLACEMENT - Continued
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PLSAC103
12. Position AC wire harness (13) in cushion clip (10).
13. Install support bar (11) and cushion clip (10) on stabilizer bracket (12) with screw (9) and locknut (8). Do
not tighten locknut (8).
14. Connect connector (6) to connector (7).
15. Install ground wire (4) on condenser (5) with washer (3), lockwasher (2), and screw (1).
CAUTION
AC wire harness needs to be secured to AC hoses and away from moving parts with
cable ties. Failure to comply may cause damage to equipment.
NOTE
Install cable ties as needed to secure AC wire harness to AC hoses and away from
moving parts.
16. Tighten locknut (8).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0048-9