DRAFT
TB 9-2320-364-13&P-1
ENGINE ACCESSORY DRIVE ASSEMBLY REPLACEMENT - Continued
INSTALLATION
PLSAC058
1. Install key (14) on engine accessory drive shaft (15).
PLSAC057
CAUTION
Rags must be stuffed in flywheel housing cavity so when screws holding drive plate
and camshaft nut lock plate to camshaft gear are installed they do not drop into
cavity. Failure to comply may result in damage to equipment.
2. Install camshaft nut lock plate (12) and drive plate (11) on camshaft gear (13) with four screws (10).
Tighten four screws (10) to 45 ft-lbs. (61 Nm).
3. Remove rags.
0049-4