DRAFT
TB 9-2320-364-13&P-1
ENGINE ACCESSORY DRIVE ASSEMBLY REPLACEMENT - Continued
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PLSAC056
4. Install gasket (9) and engine accessory drive (3) on flywheel housing (6) with four lockwashers (8) and
screws (7). Tighten screws (7) to 53-56 ft-lbs. (72-76 Nm).
5. Secure engine accessory drive (3) to flywheel housing (6) with copper washer (5) and screw (4). Tighten
screw (4) to 35-38 ft-lbs. (47-51 Nm).
PLSAC055
6. Install pulley (2) on engine accessory drive (3) with nut (1).
0049-5