DRAFT
TB 9-2320-364-13&P-1
LEFT SIDE NOISE PANEL AND RUBBER FLAP REPLACEMENT - Continued
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
PLSAC043
NOTE
Perform Step 5 if restraint bar needs to be replaced.
5. Remove four locknuts (13), screws (14), and restraint bar (6) from rubber flap (5). Discard locknuts.
PLSAC044
CAUTION
Ensure left side noise panel does not contact ether start aid assembly or electrical
cables during removal or damage to equipment may result.
6. Remove eight screws (15), lockwashers (16), washers (17), and left side noise panel (2) from vehicle.
Discard lockwashers.
0051-3