DRAFT
TB 9-2320-364-13&P-1
LEFT SIDE NOISE PANEL AND RUBBER FLAP REPLACEMENT - Continued
INSTALLATION
PLSAC044
CAUTION
Ensure left side noise panel does not contact ether start aid assembly or electrical
cables during installation.
1. Install left side noise panel (2) on vehicle with eight washers (17), lockwashers (16), and screws (15).
PLSAC043
NOTE
Perform Step 2 if restraint bar was removed.
2. Install restraint bar (6) on rubber flap (5) with four screws (14) and locknuts (13).
0051-4