TB 9-2320-364-13&P-2
DOOR HANDLE ASSEMBLY REPLACEMENT - CONTINUED
0012 00
REMOVAL
1.
Open door assembly.
2.
Remove locknut (7) and washer (8) from door cam (10) and position link rod (6) aside. Discard locknut.
3.
Loosen setscrew (4) and remove interior grab handle (11), door cam (10), and bolt (9).
4.
Remove four capscrews (2), washers (3), interior handle spacer (5), and exterior door handle (1).
4
2,3
5
1
6
7,8
417-030
11
9
10
CLEANING AND INSPECTION
Clean and inspect all parts IAW General Maintenance Instructions (WP 0011 00).
INSTALLATION
1.
Position interior handle spacer (5) and exterior handle (1) on door assembly.
2.
Install four washers (3) and capscrews (2) on exterior handle (1).
3.
Install bolt (9) on door cam (10).
4.
Install door cam (10) and interior grab handle (11). Tighten setscrew (4).
5.
Position link rod (6) on bolt (9) and install washer (8) and new locknut (7).
6.
Operate door handle to verify correct operation.
END OF WORK PACKAGE
Change 1
0012 00-2