TB 9-2320-364-13&P-2
ROOF ARMOR REPLACEMENT - CONTINUED
0023 00
INSTALLATION - CONTINUED
7.
Use lifting device to install roof armor (19) on cab roof, aligning holes in right side of roof armor with holes in cab roof.
8.
Remove sling and lifting device from roof armor (19).
9.
Install 20 washers (21), new locknuts (20), and two spacers (13) around escape hatch opening.
10.
Remove two loosely installed locknuts (17) from two stud plates (18).
11.
Install two roof armor brackets (14), 12 washers (16), and new locknuts (17) on roof armor (19).
12.
Tighten 10 bolts (15) on roof armor brackets (14).
13.
Install eight washers (5), bolts (2), washers (3), and new locknuts (4) on two antenna brackets (1).
8
1
9,10,11,12
6,7
2,3,4,5
23,24,
25
13
14
22
20,21
15
19
(HIDDEN)
18 (HIDDEN)
17
417-055
16
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can cause lung irritation.
Contact with skin can cause dermatitis. Wear gloves and safety goggles and use product in a well-ventilated
area away from open flame. If ingested, keep individual calm and seek medical attention. DO NOT induce
vomiting. If contact with skin or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW
local policy and ordinances. Failure to follow this warning may cause injury to personnel.
14.
Apply bead of sealing compound around escape hatch opening between roof armor (19) and existing roof.
15.
Install escape hatch assembly (WP 0022 00).
END OF WORK PACKAGE
0023 00-4
