II113300-1-103
Rev. A
3.3 PERSONNEL SKILL LEVEL
The installation skill level required to complete the installation of the Kit shall be MOS 63S,
Heavy Wheeled Vehicle Mechanic.
3.4 REMOVE THE EXISTING PLS COMPONENTS
Remove the existing PLS components using the existing PLS Technical Manual procedures.
WARNING
WARNING
THE EXISTING PLS DRIVER AND PASSENGER DOORS AND SKID PLATE
ARE HEAVY ITEMS THAT REQUIRE TWO PERSONNEL OR ONE
PERSONNEL AND APPROPRIATE MATERIAL HANDLING EQUIPMENT
(HOIST, FORKLIFT, ETC.) FOR HANDLING. THE WEIGHTS OF THE
COMPONENTS TO BE REMOVED ARE SUFFICIENT TO CAUSE SERIOUS
INJURY OR LOSS OF LIFE. CARE MUST BE TAKEN DURING REMOVAL TO
PREVENT INJURY.
HOISTING OPERATIONS HAVE INHERENT HAZARDS THAT CANNOT BE
MECHANICALLY SAFE-GUARDED. PERSONNEL ARE REQUIRED TO
WEAR HARD HATS AND SAFETY SHOES DURING THE USE OF MATERIAL
HANDLING EQUIPMENT TO PREVENT PERSONAL INJURY.
WARNING
THE WINDSHIELD GLASS CAN BREAK UNEXPECTEDLY DURING THE
REMOVAL / INSTALLATION PROCESS. PERSONNEL ARE REQUIRED TO
WEAR A FACE SHIELD, APRON, AND GLOVES.
NOTE
Bag and tag all removed hardware to contain it and aid in the re-installation of the
removed components.
Remove all vehicle identification plates from the driver's door and bond them
onto the new armored door with Urethane, P/N 104302, from the Windshield Kit,
P/N 113380.
0037 00-28
