|
| |
TM 9-2320-364-10
2-702
2-45. SELF-RECOVERY WINCH (SRW) (CONT).
(38)
Release the parking brake (1).
(39)
Release the service brake pedal (33).
(40)
Push the WINCH IN/OUT switch (32) to IN and apply slight pressure
to throttle control (34).
Keep cable tight at all times so cable does not get tangled
with truck. Damage to equipment may result.
(41)
Adjust the position of throttle control (34) to change engine speed
as needed to keep cable (9) tight and truck moving.
(42)
When the truck is on solid ground, release WINCH IN/OUT switch (32).
(43)
Apply parking brake (1).
(44)
Set transmission range selector (2) to Neutral (N).
(45)
Push the WINCH IN/OUT switch (32) to OUT and pay out cable (9) until all
tension is off cable.
(46)
When all tension is off cable (9), release WINCH IN/OUT switch (32) to
center position.
|
