|
| |
TM 9-2320-364-10
2-703
NOTE
If cable was connected to truck or to another truck,
perform Steps (47) through (53).
(47)
Ensure there is enough slack in cable (9).
(48)
Remove cotter pin (10) from clevis pin (11).
(49)
Remove clevis pin (11) and disconnect clevis (12) from towing shackle
(27).
(50)
Remove cotter pin (25), pin (26), towing shackle (27) and tie down ring
(23) from tow eye (28).
(51)
Remove tie down ring (23) from towing shackle (27).
(52)
Install towing shackle (27) to tow eye (28) with pin (26) and cotter pin (25).
27
26
23
25
10
11
12
28
9
|
