| |
TM 9-2320-364-10
2-824
2-58. TRUCK PREPARATION FOR TRANSPORT (CONT).
Check for overhead power lines or other obstructions before
attempting LHS operation. LHS reaches a system height of
17 ft. 2 in. (5.22 m). Serious injury or death to personnel
could result from contact with electrical power lines.
Engine speed must be at idle before using hydraulic selector
switch, or damage to equipment may result.
Do not allow spare tire to swing back and forth while raising
tire. Raise tire slowly during lifting operation and do not allow
tire to strike LHS with force. Failure to comply could cause
serious damage to equipment.
(21)
Set hydraulic selector switch (13) to MAN H.A.
(22)
Move joystick (14) to LOAD until spare tire (1) is lifted above the rear
rollers (32).
(23)
Release joystick (14).
(24)
Set hydraulic selector switch (13) MAN M.F.
(25)
Move joystick (14) to LOAD until spare tire (1) contacts LHS (33).
(26)
Release joystick (14).
|