|
| |
TM 9-2320-364-10
2-825
Engine speed must be at idle before using hydraulic selector
switch, or damage to equipment may result.
(27)
Set hydraulic selector switch (13) to MAN H.A.
(28)
Move joystick (14) to UNLOAD until spare tire (1) has moved
approximately 1 ft. (30.5 cm) away from LHS (33).
(29)
Release joystick (14).
(30)
Set hydraulic selector switch (13) to MAN M.F.
(31)
Move joystick (14) to LOAD until spare tire (1) contacts LHS (33).
(32)
Release joystick (14).
NOTE
The tire should not rest on top of the rear roller bracket.
(33)
Repeat Steps (27) through (32) until spare tire (1) rests on top of hard lift
brackets (34) and just touching forward side of rear roller brackets (32).
(34)
Remove chain (24) and return it to stowage box.
Engine speed must be at idle before using hydraulic selector
switch, or damage to equipment may result.
(35)
Set hydraulic selector switch (13) to AUTO.
|
