|
| |
TM 9-2320-364-20-2
2-884
8. CODE 24: OIL TEMPERATURE (HIGH LIMIT EXCEEDED).
INITIAL SETUP
1.
Go to Fault code 33
of ATEC
Troubleshooting.
START
NO
“CHECK TRANS” light with
trans
temperature 270 degrees F or
above.
Transmission will not go into
high gear.
TRANS oil temperature gauge
reads high temperature.
Transmission internal oil
temperature too hot.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
DDR test.
If transmission oil temperature is
not within specified limits as
described in TM 9-2320-364-10
(Operations Under Unusual
Conditions), shifts will be
restricted, and CHECK TRANS
and DO NOT SHIFT lights will
be ON. There will be no code.
When temperature exceeds 270
degrees F, CHECK TRANS light
will be ON and ATEC will
register a code 24 fault.
2-15. ATEC TROUBLESHOOTING (CONT).
Tools and Special Tools
Reader, Diagnostic (Item 53, Appendix G)
Equipment Condition
Engine OFF, (TM 9-2320-364-10)
Parking brake applied, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
References
TM 9-2320-364-10
CAUTION
Is transmission oil
temperature within 20F to
270F (-7C to 132C) range?
Refer to Transmission
Troubleshooting (Para
2-21).
YES
Read CAUTION
on Page 2-885
|
