|
| |
TM 9-2320-364-20-2
2-885
(1) Connect DDR cable to DDL
connector MC13.
(2) Start engine and allow engine to warm
up (TM 9-2320-364-10).
(3) Select DIAG CODE display and scroll
to TRANS OIL TEMP.
(a) If DDR displays more than 270F
(132C), perform Steps (4)
and (5) below and go to Fault
code 33 of ATEC
Troubleshooting.
(b) If DDR displays 270F (132C) or
less, perform Steps (4) and (5)
below and go to Transmission
Troubleshooting (Para 2-21).
(4) Turn OFF ENGINE switch.
(5) Disconnect DDR cable from DDL
connector MC13.
DDR TEST
Do not exceed 2000 engine rpm. Damage to transmission might occur.
|
