|
| |
TM 9-2320-364-20-2
2-995
Remove radiator cap and check for oil in
the coolant.
(1) If there is oil in the coolant,
install radiator cap and notify
DS Maintenance.
(b) If there is no oil in the coolant,
install radiator cap and go to
Step 2 of this Fault.
VISUAL INSPECTION
Allow engine to cool before performing troubleshooting maintenance. If necessary use insulated pads
and gloves. Hot engine components will burn and cause injury to personnel.
Do not remove the radiator cap when the engine is hot; steam and hot coolant can escape and burn
personnel.
Use a clean, thick waste cloth or like material to remove the pressure cap. Avoid using gloves. If hot water
soaks through gloves, personnel could be burned.
|
