|
| |
TM 9-2320-364-20-2
2-1189
(1) Turn ON ENGINE switch
(TM 9-2320-364-10).
(2) Turn on work light switch.
(3) Turn on work light internal switch.
(4) Observe both work lights.
(a) If both work lights fail to operate,
perform Steps (5) through (7)
below and go to Step 7 of this
Fault.
(b) If one work light operates, fault is
between faulty work light and wire
1040B first splice. Perform Steps
(5) through (7) below and go to
Step 2 of this Fault.
(5) Turn off work light internal switch.
(6) Turn off work light switch.
(7) Turn OFF ENGINE switch.
VISUAL INSPECTION
|
