| |
TM 9-2320-364-20-2
2-1270
13. ALL TURN SIGNALS DO NOT OPERATE (CONT).
Headlights operate, indicating
10 to 14 vdc are present at
splice in wire 1189 after the
blackout service select
switch.
Turn signal switch/hazard
switch OK.
Wire 1189 OK.
Wire 1080 OK.
Flasher M5 faulty.
Turn signal/dimmer switch S1
faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Voltage test.
STE/ICE-R #89.
If 2 to 10 vdc are not present,
flasher is faulty. If 2 to 10 vdc
are present, turn signal/dimmer
switch is faulty.
YES
NO
Replace flasher M5
(Para 7-97).
Verify repair, go to
Step 5 of this Fault.
4.
Are 2 to 10 vdc measured on
wire 1080 at turn
signal/dimmer switch
connector MC7, terminal F?
Replace turn signal/
dimmer switch
(Para 7-35).
Verify repair, go to
Step 5 of this Fault.
WARNING
Headlights operate, indicating
10 to 14 vdc are present at
splice in wire 1189 after the
blackout service select
switch.
Turn signal switch/hazard
switch OK.
Wire 1189 OK.
Wire 1080 OK.
Flasher M5 OK.
Turn signal/dimmer switch S1
OK.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Verify repair.
If turn signals operate, fault has
been corrected.
YES
NO
Fault not corrected.
Notify DS
Maintenance.
5.
Do turn signals operate?
Fault corrected.
WARNING
Read WARNING
on Page 2-1271
Read WARNING
on Page 2-1271
|