| |
TM 9-2320-364-20-2
2-1274
14. RIGHT REAR TURN SIGNAL DOES NOT OPERATE (CONT).
Left rear turn signal operates
indicating 2 to 10 vdc
supplied to turn signal switch.
Right taillight operates
indicating composite light
ground wire 1435 OK.
Turn signal lamp OK.
Composite light faulty.
Wire 1004 faulty.
Turn signal/hazard switch
faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If the turn signal socket is faulty
or corroded, turn signal will not
operate.
YES
NO
Replace rear
composite light
(Para 7-47).
Verify repair, go to
Step 6 of this Fault.
Is there continuity measured
between socket ground con-
tact of turn signal socket and
a known good ground?
Fault not corrected.
Notify DS
Maintenance.
2.
Go to Step 4 of this
Fault.
YES
NO
Left rear turn signal operates
indicating 2 to 10 vdc
supplied to turn signal switch.
Right taillight operates
indicating composite light
ground wire 1435 OK.
Turn signal lamp OK.
Composite light faulty.
Wire 1004 faulty.
Turn signal/hazard switch
faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Voltage test.
STE/ICE-R #89.
If 2 to 10 vdc are not present,
the turn signal will not operate.
WARNING
WARNING
Is a pulsating voltage of 2 to
10 vdc measured at socket
power contact of turn signal
socket?
3.
Read WARNING
on Page 2-1275
Read WARNING
on Page 2-1275
|