|
| |
TM 9-2320-364-20-2
2-1625
(1) Connect positive (+) multimeter lead to
socket in position 2 on connector MC22.
(2) Connect negative (–) multimeter lead
to known good ground.
(a) If 10-14 vdc are not present, repair
orange wire (see schematic
Fig 2-39).
(b) If 10-14 vdc are present, orange
wire is OK. Replace regulator
(Para 7-6).
(3) Connect connector MC22.
VOLTAGE TEST
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive electrical
circuits, a direct short may result. Damage to equipment, injury or death to personnel may occur.
|
