|
| |
TM 9-2320-364-20-2
2-1731
Check driveshafts, lockstraps, screws
and bearing cap for looseness (Para 2-9).
(1) If screws are loose, tighten to
specifications (Para 10-2).
(2) If screws are not loose, go to Step 3
of this Fault.
VISUAL INSPECTION
Check universal joints for damage
(Para 2-9).
(1) If universal joint(s) are worn, replace
universal joint(s) (Para 10-2).
(2) If universal joint(s) are not worn,
go to Step 4 of this Fault.
VISUAL INSPECTION
|
