|
| |
TM 9-2320-364-20-2
2-1750
Both brakes on Axle No. 3 fail to
release correctly.
Air lines crimped or leaking
and/or fittings leaking.
Relay spring valve No. 1 leaking.
Relay spring valve No. 1 faulty.
Air chambers faulty.
Brakes faulty.
2. PARKING BRAKES ON AXLE NO. 3 DO NOT RELEASE.
INITIAL SETUP
1.
Do both sets of parking
brakes on Axle No. 3 fail to re-
lease?
If only one parking
brake fails to release,
go to Step 5 of this
Fault.
START
YES
NO
Parking brakes on Axles No. 4
and No. 5 operate correctly.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Visual inspection.
If only one parking brake fails to
release, problem is in air
chamber or brake components.
2-24. BRAKES SYSTEM TROUBLESHOOTING (CONT).
Tools and Special Tools
Tool Kit, General Mechanic’s: Automotive
(Item 74, Appendix G)
Pressure Test Kit (Item 50, Appendix G)
Personnel Required
Two
Equipment Condition
Parking brake applied, (TM 9-2320-364-10)
Wheels chocked, (TM 9-2320-364-10)
References
TM 9-2320-364-10
WARNING
NOTE
The following troubleshooting procedures cover one set of brakes for Axle No. 3, but they apply to both
sets of brakes.
Read WARNING
on Page 2-1751
|
