|
| |
TM 9-2320-364-20-2
2-1751
(1) Jack-up three rear axles until wheels
are off ground (TM 9-2320-364-10).
(2) Shift transfer case to N (neutral).
(3) Release PARKING BRAKE.
(4) Try to turn wheel on Axle No. 3 by
hand.
(a) If one wheel fails to turn, perform
Step (5) below and go to
Step 5 of this Fault.
(b) If both wheels fail to turn, perform
Step (5) below and go to
Step 2 of this Fault.
(5) Lower wheels to the ground.
VISUAL INSPECTION
Truck must be on level ground and wheels must be chocked before parking brake is released. Otherwise, truck
may roll and cause injury to personnel.
|
