| |
TM 9-2320-364-20-3
2-2016
7. AXLES NO. 1 AND NO. 2 TIRE PRESSURES DO NOT AGREE WITH CTIS
SETTINGS (CONT).
Rear tires inflate/deflate.
CTIS wire harness
connections OK.
CTIS controller OK.
Wiring harness faulty.
CTIS front manifold faulty.
Transducer faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
YES
NO
Repair wire(s) (see
schematic Fig 2-48)
or notify DS
Maintenance.
Verify repair, go to
Step 7 of this Fault.
3.
Is continuity measured on all
wires between connector
MC111 and connector
MC109?
If wire harness is faulty, tires
will not inflate to correct
pressure.
|