| |
TM 9-2320-364-20-3
2-2152
11. REAR MANIFOLD CLICKS CONTINUALLY/LOW AIR LIGHT FLASHING (CONT).
26.
Are 22 to 28 ohms resistance
measured between inflate
valve terminals 1 and 2?
Replace inflate valve
solenoid (Para 13-10).
Verify repair, go to
Step 28 of this Fault.
YES
NO
System air pressure greater
than 110 psi (758 kPa).
Front manifold not clicking
continuously.
CTIS harness connectors OK.
CTIS controller OK.
CTIS wire harness OK.
Air line 2994 and fittings OK.
CTIS rear manifold not leaking.
Rear manifold OK.
No air pressure at transducer.
10 to 14 vdc present at inflate
valve connector.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Resistance test.
STE/ICE-R #91.
If there are not 22 to 28 ohms at
inflate valve solenoid, solenoid
is faulty.
WARNING
Inflate valve solenoid faulty.
Inflate valve faulty.
Read WARNING
on Page 2-2153
|