| |
TM 9-2320-364-20-3
2-2209
Allow engine to cool before performing troubleshooting maintenance. If necessary use insulated pads
and gloves. Hot engine components will burn and cause injury to personnel.
Wear safety goggles when performing tests on valves. Failure to do so may result in serious eye injury
due to high pressure air.
Check oil hoses 2628 and 2630 for
damage, crimps or leaks.
(1) If hose(s) are damaged, crimped or
leaking, tighten fittings or replace
hose 2628 and/or 2630.
(2) If there are no leaks, crimps or
damage, hoses and fittings are OK.
VISUAL/AUDIBLR INSPECTION
|