| |
TM 9-2320-364-20-3
2-2276
2. LHS NO TRANS LIGHT DOES NOT OPERATE (CONT).
10.
Is continuity measured on
wire 1725 at harness
connector MC83, terminal S
and LHS NO TRANS lamp
harness connector?
Repair wire 1725
(see schematic
Fig 2-52) or notify
DS Maintenance.
Verify repair, go to
Step 12 of this Fault.
YES
NO
LHS NO TRANS lamp OK.
Proximity switch adjusted
correctly.
Wire 1472 OK.
Wire 1435 from proximity
switch OK.
Wire 1471 OK.
Proximity switch OK.
LHS control assy OK.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If wire 1725 is loose, faulty, or
shorted to ground, 22 to 28 vdc
will not be present at LHS NO
TRANS lamp.
WARNING
Wire 1725 faulty.
Wire 1435 faulty.
Read WARNING
on Page 2-2277
|