|
| |
TM 9-2320-364-20-3
2-2296
3. LHS OVERLOAD LIGHT DOES NOT OPERATE (CONT).
8.
Is continuity measured on
LHS OVERLOAD lamp
connector wire 1726 and
harness connector MC83,
terminal R?
Repair wire 1726
(see schematic
Fig 2-52) or notify
DS Maintenance.
Verify repair, go to
Step 10 of this Fault.
YES
NO
LHS OVERLOAD lamp OK.
Wire 1479 OK.
Wire 1460 OK.
Overload differential pressure
switch OK.
LHS control assy OK.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If wire 1726 is loose, faulty, or
shorted to ground, 22 to 28 vdc
will not be present at LHS
OVERLOAD lamp.
WARNING
Wire 1726 faulty.
Wire 1435 faulty.
Read WARNING
on Page 2-2297
|
