|
| |
TM 9-2320-364-20-3
2-2298
Repair wire 1435
(see schematic
Fig 2-52).
Verify repair, go to
Step 10 of this Fault.
3. LHS OVERLOAD LIGHT DOES NOT OPERATE (CONT).
LHS OVERLOAD lamp OK.
Wire 1479 OK.
Wire 1460 OK.
Overload differential pressure
switch OK.
LHS control assy OK.
Wire 1726 OK.
Wire 1435 OK.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Verify repair.
If LHS OVERLOAD light
operates, fault has been
corrected.
YES
NO
Fault not corrected.
Notify DS
Maintenance.
10.
Does LHS OVERLOAD light
operate?
Fault corrected.
9.
YES
NO
LHS OVERLOAD lamp OK.
Wire 1479 OK.
Wire 1460 OK.
Overload differential pressure
switch OK.
LHS control assy OK.
Wire 1726 OK.
Wire 1435 faulty.
KNOWN INFO
POSSIBLE PROBLEMS
TEST OPTIONS
REASON FOR QUESTION
Continuity test.
STE/ICE-R #91.
If wire 1435 is loose or faulty,
LHS OVERLOAD lamp will not
be grounded.
Is continuity measured on
wire 1435 at LHS OVERLOAD
lamp connector and chassis
ground?
WARNING
WARNING
Read WARNING
on Page 2-2299
Read WARNING
on Page 2-2299
|
