TM 9-2320-364-20-3 2-2466 Repair wire 1461 (see schematic Fig 2-52) or notify DS Maintenance. Verify repair, go to Step 10 of this Fault. 14.  LHS DOES NOT UNLOAD IN AUTO MODE (CONT). LHS operates in MAN HA   position. LHS operates in MAN MF   position. Proximity switch (hook arm up)   adjustment OK. Wire 1485 OK. Hydraulic selector switch OK. Wire 1461 OK. Wire 1435 faulty. Proximity switch (hook arm up)   faulty. Wire 1466 faulty. LHS control assembly faulty. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION Continuity test. STE/ICE-R #91. If wire 1435 is faulty, proximity switch will not be grounded. YES NO Repair wire 1435 (see schematic Fig 2-52) or notify DS Maintenance. Verify repair, go to Step 10 of this Fault. 6. Is continuity measured on wire 1435 between terminal 2 and chassis ground? 5. YES NO LHS operates in MAN HA   position. LHS operates in MAN MF   position. Proximity switch (hook arm up)   adjustment OK. Wire 1485 OK. Hydraulic selector switch OK. Wire 1461 faulty. Wire 1435 faulty. Proximity switch (hook arm up)   faulty. Wire 1466 faulty. LHS control assembly faulty. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION Voltage test. STE/ICE-R #89. If wire 1461 is faulty, 22 to 28 vdc will not be present at LHS junction box. WARNING WARNING Are 22 to 28 vdc measured at LHS junction box, terminal 1 with ENGINE switch in the ON position? Read   WARNING on Page 2-2467 Read   WARNING on Page 2-2467