TM 9-2320-364-20-3 2-2704 10.  OUTRIGGERS DO NOT OPERATE (CONT). 17. Replace WINCH/CRANE switch (Para 17-20).   Verify repair, go to Step 24 of this Fault. YES NO WINCH/CRANE switch in   CRANE position. Self recovery winch operates. Hose 2902 OK. Crane hoses and tubes OK. Wire 1738 OK. White wire from truck connector   MC29 to rectifier OK. Rectifier OK. White wire from rectifier to   POWER switch OK. POWER switch OK. Black wire from POWER   switch to OSS OK. OSS OK. Red wire from OSS to crane   junction box, terminal 19 OK. Outrigger/mast shutdown valve   harness connector white   wire OK. Outrigger/mast shutdown   valve harness connector   black wire OK. WINCH/CRANE switch faulty. Wire 1731 faulty. Black wire from truck   connector MC29 to system   shutdown relay faulty. System shutdown relay faulty. White wire from system   shutdown relay to crane   junction box, terminal 3   faulty. Main hydraulic pressure valve   harness connector white   wire faulty. Main hydraulic pressure valve   harness connector black   wire faulty. KNOWN INFO POSSIBLE PROBLEMS TEST OPTIONS REASON FOR QUESTION Continuity test. STEC/ICE-R #91. If WINCH/CRANE switch is faulty, 22 to 28 vdc will not be input to main hydraulic pressure valve. WARNING Is continuity measured between WINCH/CRANE switch, terminals 1 and 5 with switch in CRANE position? Read   WARNING on Page 2-2705