|
| |
TM 9-2320-364-20-4
12-135
(5)
Remove air line 2003 (10) from elbow (11).
(6)
Remove two screws (12), lockwashers (13),
washers (14) and mounting clips (15) from
two air reservoir brackets (16). Discard
lockwasher.
(7)
Loosen four locknuts (17) and screws (18)
from reservoir mounting brackets (19).
Air reservoir will fall when
screws are removed. Support air
reservoir prior to removing
screws to prevent injury to
personnel.
(8)
With the aid of an assistant, remove two nuts
(20), lockwashers (21) and screws (22) from
reservoir mounting brackets (19). Discard
lockwashers.
NOTE
Note position of air reservoir
prior to removal.
(9)
Rotate air reservoir (23) 180 degrees.
(10)
Remove air reservoir (23) and drain valve
cable (24) by sliding air reservoir forward
out of two reservoir mounting brackets (19).
|
