|
| |
TM 9-2320-364-20-4
12-137
c.
Installation.
Adhesives, solvents, and sealing
compounds can burn easily, can
give off harmful vapors, and are
harmful to skin and clothing. To
avoid injury or death, keep away
from open fire and use in well-
ventilated area. If adhesive,
solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and
water.
NOTE
Install elbows, tees and fittings
as noted prior to removal.
(1)
Position air reservoir (23) in soft jawed vise.
(2)
Apply sealing compound to threads of drain
valve (35).
(3)
Install drain valve (35) on air reservoir (23).
NOTE
Perform Step (4) if drain valve
cable was removed.
(4)
Cut new drain valve cable (24) to 36 in.
(91 cm) and crimp on drain valve (35).
(5)
Apply sealing compound to threads of
elbow (11).
(6)
Install elbow (11) in air reservoir (23).
(7)
Apply sealing compound to threads of two
elbows (9).
(8)
Install two elbows (9) in air reservoir (23).
(9)
Apply sealing compound to threads of elbow (6) and reducer fitting (34).
(10)
Install elbow (6) and reducer fitting (34) in air reservoir (23).
(11)
Apply sealing compound to threads of check valve (33) and elbow (4).
(12)
Install check valve (33) and elbow (4) in air reservoir (23).
(13)
Apply sealing compound to threads of check valve (32) and elbow (2).
(14)
Install check valve (32) and elbow (2) in air reservoir (23).
(15)
Remove air reservoir (23) from vise.
|
